<h4>Chapter 431: Iplete World No. 1</h4>


    The International Energy Organization sets the standard for measuring whether a country has the ability to manufacture nuclear weapons, and it depends on whether this country can produce high gas centrifuge.


    Standing in front of this square, nearly three-story-high, with only silvery-white metallic color equipment, Ye Qing’s gaze had never left the centrifuge protection cover, two centrifugal tforms with a diameter of over two meters.


    Even if we wouldn’t watch at its 50,000 turns and looking around in the world, there were few factories that could make the tform of this centrifuge of two meters in diameter; the surface height error was no more than nanometers. The surface roughness was one-third of that of mobile-phone ss on the market, and it also illuminated people than mirrors.


    Inside the centrifugal tform, there was also an electric heating function that kept the surface temperature of the tform at 7 degrees to ensure the ss melts had a softening temperature. At 7 degrees, the metal tform did not produce thermal deformation. This was another thing, allowing metal materials to be used. Oh what a shame on the ck technology of soil drilling.


    With this centrifugal, the surface of the ss is not greater than that of the tin of the mirror. The ss produced by the machine is no different from ordinary ss to the naked eye, but the picture rendering effect will be clearly distinguished from ordinary cell phone ss.


    To produce traditional float ss with density and granrity of the tin liquid rtivelyrge, the surface roughness of the ss floating on the upperyer will not be higher than that of the tin liquid. With this centrifugal, the thickness of the ss is not greater than that of the tin of the mirror and the ss produced by the machine is no different from ordinary ss to the naked eye, but the picture rendering effect will be clearly distinguished from ordinary cell phone ss.


    Hearing Ye Qing’s order, Master Qiao turned on the preheating switch of the centrifuge. Metals expert, when the tform temperature reached seven hundred degrees, the ss melt in the crucible was slightly tight with special equipment and ced in the center of the centrifuge table. The protective cover was closed, and the rotating tform above it slowly lowers at the moment when it touched the molten ss, it stopped descending.


    The upper tform would gently press the ss and rotate together to prevent the centrifugal force from throwing the ss away. At the same time, the tform would follow with an imperceptible degree while rotating. The ss that was thinned by the centrifugal force would descend synchronously so that the thickness of the ss would be controlled to 0.1 mm or thinner.


    "Om~"


    Ye Qing could not see the two centrifugal tforms rotating through the ss of the protective cover. He just felt fixed on the ground like there was a 500-kilometer high-speed train passing by. The roar of the machinery violently roared, and the air was violently agitated. This feeling was both wonderful and shocking. The upper and lower rotating tforms seemed to be motionless. But its rotation was already twenty-five times that of an ordinary car when it was running.


    Bugatti Veyron EB 16.4?!


    If you use this tform as a car to run, with sparks and lightning all the way, fighter jets will be unable to catch up.


    One minuteter, the violently roaring centrifuge slowly stopped running. The top workbench raised and the protective cover opened automatically.


    Ye Qing, who was covering his ears, hurried forward, and then something amazing happened. The molten ss on the bottom workbench had disappeared, and there was no ss on the workbench and it was brighter than the mirror. If it hadn’t been in a high-temperature state, Ye Qing would definitely touch it with his hands.


    "There is ss on it." Master Qiao gave a sessful smile: "Boss, thatyer of ss is too transparent, you can’t see it."


    After speaking, Master Qiao used a special tray that had already been made and gently inserted it into the centrifuge tform. At this time, Ye Qing could refract the light from the shaking of the ss and vaguely saw a thin ss-likeyer.


    "Without fragmentation, we seeded." He couldn’t believe the experiment would be sessful in one go.


    Edison used electric bulbs to experiment with more than 2,000 methods. It took four years for theputer to transition from a tube to a transistor. The Monster Factory challenged the world’s thinnest mobile-phone ss, and it only took one week to prepare.


    Waiting patiently for this thin mobile phone disy ss to cool down, Ye Qing put onboratory gloves and gently squeezed this piece, so that the ss at its edge could only be blurred by the naked eye. It had only the thickness of a banknote and had to be the kind of brand, new banknote that just came out of the banknote printing factory.


    "With a two-meter diameter circle, he shed a shlight along the corner he held up so that this piece of ss disy ss could reflect less clearly in the air.


    "Beautiful and perfect."


    Then he dropped the bright shlight and measured the thickness with an electronic caliper.


    "Just right 0.1 mm."


    It was produced ording to the ck technology drawings; the thickness of the final dream disy is only 0.1 mm.


    If other materials were used instead of ss, it could be made thinner, even thinner than silk, and could be rolled up at will. He did not use backlight means to make the disy transparent. Of course, this did not have amercial use-value. The screen with extremely poor hardness could easily draw nails’ marks. And after two days of ying, the disy would be damaged.


    If you can produce flexible ss, you can use the same technology and different material formtions to produce flexible substrates attached to organic diodes.


    "Cut into 5.5 inches and test the performance of the ss." Ye Qing gently put down the thin piece of ss with the most gentle movement, a little excited: "Organic diode coatings should also be produced quickly. We will not study mass production. The method is to produce a dream disy as soon as possible...Then tomorrow..."


    The Master Craftsman took the tray and went to the non-standard product workshop on the ground, and Ye Qing had followed him along to the non-standard product workshop. Qiao had ced the tray on the rare-qualityser cutting machine and set the power and cutting size.


    The incandescentser line thinner than silk had traversed this thin ss, and it was cut into nine standard ss in less than ten seconds. The rest was reserved for future use. While the Master Craftsman was testing the ss, an Electronic Messenger also began disassembling a cell phone.


    It was a group of Master Craftsmen who ran to open a cell phone repair shop to make all thepetitors lose their jobs. With a carving knife and a heating air gun, they could dismantle a mobile phone faster than a bear kid dismantles building blocks.


    Using rubber tweezers, the master craftsman gently had picked up a 5.5-inch thin ss, ced it on thepression tester, and tested it at the same time with a piece of ordinary disy ss just removed from the mobile phone.


    The two sses have been positioned, and the pressure table slowly had applied pressure to the two sses at the same time.


    At 0.2 MPa. Both pieces of ss were bent.


    At 0.5 MPa. The bending amplitude of the thin ss was obviouslyrger than that of the ordinary mobile phone disy ss.


    When it was added to 0.8 megapascals, without warning, the thin ss cracked into snowkes with a "click~."


    Ye Qing’s heart instantly cooled, because the ss of the ordinary mobile phone next to him was intact.


    The test continued, and when it reached 2.5 MPa, the ordinary cell phone ss cracked. Test results showed itspressive strength was three times that of the world’s first thinnest disy ss that has just been released.


    Although the disy ss was only the inner screen, there was ayer of outer screen ss for protection. But when the data was three times worse, it was difficult to ensure the internal screen would not be damaged when the mobile phone is identally dropped.


    A mobile phone whose internal screen shatters quickly is simply an inferior product.


    After the tensile test, the strength of ordinary mobile phone disy ss was twice that of thin ss.


    In the bending resistance test, the thin ss was more than twice as good as ordinary ss.


    After the Electronic Messenger reced an Apple 7p’s disy ss with this kind of thin ss, Ye Qing had picked up the 7p and threw it to the ground. After the bang, he picked up the screen and found that the inner screen was unbroken. He tried again from a two-meter high position with the screen facing down. After the heart-wrenching impact, the internal and external screens of this phone were all broken.


    "Unqualified." Ye Qing rubbed his face. As expected, the number one in the world is not so easy to get, especially when manufacturing non-metal products that are not very good.


    "Boss, we can use vapor deposition on both sides of the ss to te a nano-level diamond coating to increase the strength of the ss."


    The Master Metal Expert who had made flexible ss materials with high-purity quartz himself stepped forward and said with confidence: "Diamond itself is transparent, and the coating does not affect the light transmittance of the ss."


    "Just doing this, the cost will be much higher. The diamond is a diamond. Thin ss is transformed into nano-diamond coated ss, so the cost is more than doubled?


    "The cost of this kind of ss is not high. Mass production will tten the cost. Moreover, ours is a tall diamond-coated ss, which is more expensive of course." Ye Qing became happy and asked Qiao to dismantle another mobile phone.


    He forgot he was in a bad mood just now. Now he wants to look at ordinary mobile-phone disys. After changing the thin ss, would the color of the picture be improved?