Chapter 131: Creating a Supeputer and Adding Points to It


    Trantor: EndlessFantasy Trantion Editor: EndlessFantasy Trantion


    Before he went to bed at night, Tang Rui had already sessfully manufactured twoboratory multi-functional robots.


    He made two of them because they were different models. Type A was a multi-legged and multi-armed robot, which was more suitable for manufacturing, while Type B was a tracked scanning robot used for transportation, lifting, and scanning.


    With these two types of robots, the followingboratory modifications would be much more convenient.


    “Celia, ording to the blueprints, create ten A-type robots and five B-type robots.”


    “Alright.”


    Before leaving theboratory, Tang Rui gave Celia an order. By the time he woke up the next day, these 15 robots would be almost finished. They took the elevator back to the vi.


    When Tang Rui returned to the room, he found that Li Shuyao was not there. What was going on? Hadn’t she finished showering? That shouldn’t be the case.


    Just as Tang Rui turned his head and was about to leave the room, Li Shuyao pushed open the door.


    Damn!


    At that moment, Li Shuyao walked in slowly with long blond hair and a white wedding dress.


    “Are you my Master?” Li Shuyao looked at Tang Rui and asked with a smile.


    Who could withstand this? That was not right; there was still one thing missing. Tang Rui quickly ran out of the room under Li Shuyao’s dumbfounded gaze. When he returned to his room, there was a red rope in his hand.


    “This is what a god should do.”


    After tying the rope to Li Shuyao’s wrist, he fused with the heroic spirit. At this moment, Tang Rui’s attributes were double A in strength and speed.


    The next day, when Tang Rui woke up, Li Shuyao had already gone to work, and it was evident she had left in a hurry in the morning since she hadn’t cleaned the bedroom.


    He stretched and felt a little ufortable on his back. In the next second, he pulled out a whitece rag from under the nket. This was the wreckage of the wedding dress. Tang Rui curled his lips, casually threw it away, and got up to wash up.


    After breakfast, he came to theboratory to transform a Type A robot into a housework robot. “Celia, control this robot and clean the vi.”


    “Alright.”


    “Show me the holographic projection model of the supeputer.”


    “Alright.”


    “Celia, control the B-type robot and move the supeputer parts to theboratory.”


    “Alright.”


    With the robots, Tang Rui only needed to open his mouth, and everything else, the robot would do it. He sat on the sofa and looked at the holographic projection of the supeputer in front of him.


    This supeputer wasn’t the Sunway TaihuLight. Although the supeputer was powerful, its system structure and construction structure were not suitable for artificial intelligence.


    The supeputer in front of him was the Pengcheng Al No. 2, the supeputer that Celia’s mainframe currently resided in.


    Compared to the Sunway, this supeputer was far inferior, whether in terms of peak or averageputing power. They were not on the same level. But the problem was…


    This supeputer was specially built for artificial intelligence. The system framework included a deep learning simtion algorithm specifically for artificial intelligence.


    He didn’t care aboutputing power. In any case, he had to strengthen and level up. Instead of spending a lot of money on a supeputer, it was better to build a suitable one and then strengthen it.


    After a while, five B-type robots brought a bunch of parts back to theboratory. There was nothing else to say; let’s do it.


    In the morning, Tang Rui assembled a de array the size of a wardrobe. Next, he had to assemble 199 de arrays of this size before he couldplete the mission. If he relied on himself, it would definitely not work.


    However, there was a temte, and he had done it himself. Next, he would let Celia control the Type A robot to work. Although he wasn’t sure if he could get origin points, he could give it a try. It didn’t matter if he didn’t.


    In any case, the equipment he created and the equipment he created would have a system interface. It was just that there was no origin point.


    “Celia, start production ording to the blueprint and production process.”


    “Alright.”


    Fourteen A-type robots began to assemble the supeputer. The remaining two Type A robots helped Tang Rui do other things. “Celia, cut the stainless steel te ording to the lines 1 drew.”


    “Alright.”


    Two robots grabbed the stainless steel te, and theser cutting equipment was ready to be activated at any time.


    Tang Rui stood in front of the holographic projection, drawing lines on the stainless steel te in front of him. As his fingers moved, lines appeared on the stainless steel te.


    Of course, this was not the final result. He still had to correct these lines. Otherwise, with the crooked lines he drew, the stainless steel te he cut out could not be used.


    After a while, after the line was corrected, Tang Rui clicked OK.


    Bzz…


    Theser cutting equipment on the mechanical arm was activated and began to cut ording to the coordinates. In less than twenty seconds, the stainless steel te was cut.


    “Celia, bring the stainless steel te over.”


    “Alright.”


    The robot brought the cut stainless steel te in front of Tang Rui. This stainless steel te was not used for anything else but to build a cab for the supeputer.


    Previously, he had already built a shelf, and the outer shell was not even made. Now, he had to patch up the outer shell.


    “Celia, scan the cab’s outer shell and continue cutting the stainless steel te to create the outer shell.”


    “Alright.” The two Type A robots went to cut the stainless steel tes again. Tang Rui walked to the refrigerator beside him and took out a bottle of iced c from inside.


    Ton, ton, ton, ton…


    “Awesome!” After drinking half a bottle of iced c, Tang Rui burpedfortably. He looked at the dozens of robots working in theboratory and felt very good. Only then did he feel something.


    However, theboratory had not been renovated yet. He had to build the supeputer first, or else theputing power would not be enough.


    At noon, Tang Rui went to the cafeteria to eat and check on thepany’s situation while he was at it. Everyone was busy with their work.


    The progress of the material experiment was very gratifying. The high-temperature resistant material had already been created, and its melting point had reached an astonishing 4.280 degrees.


    They were currently researching the processing technology. Once the materials could be processed, he would have the materials for the body.


    There was nothing much to do in the afternoon. Tang Rui decided to go back and catch up on sleep. He was a little tired yesterday.


    In the next few days, he had been holed up in theboratory, constantly nning theboratory and getting Celia to generate 3D simtion renderings.


    One day, when he was struggling with a design proposal, Celia informed him that the supeputer cab had beenpleted. Tang Rui directly put down the design in his hand.


    They arrived at the supeputer room. 200 cabs were ced side by side, all connected in series. The stainless steel shell that was not painted shone with a silver-white light. He arrived in front of the mainframe of the supeputer control system. Tang Rui saw the system panel.


    [Item: Supeputer]


    [Experience: 0/2000]


    [Origin: 1957-45]


    Looking at the number of origin points, he knew that this supeputer did not give him any more of it. Otherwise, with the supeputer’s size, he could at least add dozens or even hundreds of origin points.


    Unfortunately, the loopholes in the system were not so easy to exploit.


    He had only created a cab, and the system had already recognized him. But it didn’t matter. Tang Rui directly began to add points to the supeputer..