Chapter 63 Reverse Research


    Then I think of the faint uneasiness that the purple sky light brought him outside the shelter at this moment.


    Su Wu''s conservative idea became stronger.


    "After reinforcing the exit passage."


    "Let''s close it for the time being."


    "There will not be opened again unless necessary in the future."


    "Then the engineering team opened a vertically upward passage from the 5th floor underground."


    "A lift is installed for that passage, specifically for transporting soil and rocks."


    It is different from the first four floors of the shelter.


    As the engineering team is about to add a large number of huge construction equipment.


    Originally, the first floor of the shelter had an area of ??600 square meters and a height of 6 meters, which seemed a bit narrow. And it cannot perform the performance of the new version of the construction vehicle.


    Therefore, at the beginning of design, Su Wu simply expanded the area of ??the fifth floor by five times and increased the height to 12 meters.


    Such a wide space.


    Of course, it also staggered most of the positions with the four floors above. A separate vertical channel to the outside world is established with conditions.


    And in this way, it is actually equivalent to temporarily separating the 5th floor underground from the entire shelter body.


    Even if there is any accident outside, I broke in through the vertical channel.


    At most, it can only destroy the fifth underground floor being excavated, which will not have much impact on the first four closed floors.


    The engineering team that received Su Wu''s latest order suspended the ongoing excavation work.


    Start looking for locations in place and build new vertical passages.


    At the same time, the engineering robots affiliated to the engineering team led two construction robots to the shelter exit passage.


    On the side of the outlet passage close to the lifting platform, that is, the innermost part of the outlet passage, the metal door there is reinforced and thickened. By the way, three hidden shooting platforms were installed on the walls and ceiling outside the door.


    It is used to play some defensive role when an enemy accidentally breaks into the passage.


    The shelter gate at the outermost exit passage slowly closes with the slight sound of mechanical gear rotation after the miniature transporter that had transported the soil and rocks back.


    "The reinforcement of the exit channel location is expected to be completed in 1 hour and 17 minutes."


    "It''s such a short time."


    "Nothing should go wrong."


    I took a look at the construction schedule sent back by artificial intelligence.


    Su Wu was still worried.


    However, this emotion is not strong. After all, even during construction, the outermost door of the exit passage has been closed.


    Even if it is really dangerous, it will definitely give him enough reaction time to deal with it.


    As for the vertical passage of the 5th floor.


    Its construction progress is a little irrelevant. Anyway, they are all driverless mechanical equipment.


    A little earlier or later will not affect Su Wu''s own safety.


    "In addition, a batch of monitoring and early warning devices must be placed outside."


    "I don''t say it''s a big deal."


    "At least, when you encounter problems, you can know earlier and have more time to deal with them."


    The purple light comes from the sky, which means that danger may also come from the natural environment.


    In this case, it is undoubtedly a bit stupid to limit your attention to your own shelter.


    Su Wu must try to put his sight further away.


    This kind of thing.


    It might be a bit difficult in the past, and Su Wu couldn''t come up with so many cameras and detection devices.


    But now, after the 3D printer can print some micron-scale chips.


    Camera and sensors, common electronic devices that are not complicated, have become cheap items that can be mass-produced at will.


    Enter a command on the console.


    Send relevant manufacturing tasks to 3D printers and give them priority to manufacturing. Su Wu opened the logging record of the manufacturing center on the second floor of the underground.


    Turned to the research page.


    A obviously incomplete drone design drawing appears in the center of the screen.


    "Is the research progress only 72%?"


    "It''s a bit slow."


    Su Wu frowned.


    Realizing that it is difficult to reversely study the design drawings of drones by relying on only one engineering robot to disassemble them manually.


    Different from those previously produced open source products that have been made with simple structures, lag behind the times, or related technologies have long been published on the Internet.


    Drones, especially commercial-grade drones with good flight speed and load capacity.


    The trade secrets of some high-tech companies have been involved.


    Even artificial intelligence cannot find relevant design drawings on the Internet.


    No mistakes, one song, one content, one in 6, one book, one bar, one reading!


    In this case, you want to use a CNC machine tool or a 3D printer to copy the drone.


    It is necessary to draw a detailed design drawing through project research on drones.


    “The main difficulty.”


    "It''s stuck in chips, solid-state batteries, and material ratios."


    I took a closer look at several main places that stuck in the research progress.


    Su Wu knew that it was already a luxury to draw the drawings in a short period of time.


    He sighed and gave up the idea of ??self-producing.


    Instead, open the list of materials warehouses.


    Focus on one of the universal grade drones with a load of 5 kg.


    This general-purpose drone with good load and flight speed is in stock in the warehouse.


    Remodel a little to enhance the heat dissipation capability.


    It should be able to be used for emergency use.


    "Just choose them."


    Time was in Su Wu''s somewhat anxious mood, and more than an hour passed.


    As the outlet passage is reinforced, it is completely closed.


    And the first batch of various detectors suitable for the field were printed out one after another by 3D printers.


    His mood finally gradually calmed down.


    No matter what kind of disaster he is going to face, at least his refuge is becoming stronger and safer bit by bit.


    [The drone lift platform has been activated. ]


    [Universal UAV Completed Loading. ]


    [Start into takeoff procedure. ]


    on the console''s large main control screen.


    Lines of prompt information from artificial intelligence are constantly refreshing.


    Cold and orderly text.


    It creates a somewhat solemn atmosphere, just like being in the command center of the rocket launch site.


    But it is precisely this solemnity and stability that makes Su Wu feel an extra safe.


    This is his power.


    On the surface, just below the small bunker.


    The two robotic arms put the folded detectors, cameras, signal repeaters, etc. into the airdrop cabin under the general-purpose drone.


    Until the lights representing load on a universal drone, it turns from green to yellow.


    Then stop moving and allow it to pass through the conveyor belt and enter the drone lifting platform.


    Then continue loading the next universal drone.


    Highly automated and standardized operations bring extremely high efficiency.


    (End of this chapter)