In fact, in addition to this simple menu, there are many numbers floating in this space.


    For example, there is a line of small words at the top of the menu:


    Design Room: level1, exp: 010


    Even on the right side of the menu that can be made, there is a number: 22.


    In the space around him, there are some numbers suspended in the air, which indicate the current boundary and scope of the design room. It seems that this white space is not entirely the scope of the design room. The surrounding should be regarded as the internal space of the book of creation, and the design room is only one of its components.


    This is the effect of quantitative eye.


    The quantitative eye is a skill that Huang Si can''t understand. It can''t show anything. What it shows must be something Huang Si can detect by careful observation and research, such as molecular diameter.


    Taking the current level and experience value of the design room as an example, through the memory lost to Huang Si by the book of creation, he can vaguely feel that the design room can be upgraded, and there may be new menu items in the future.


    As for the 22 that can be made, it obviously means that only these two things can be made, and there are no other things that can not be made.


    Then see what you can do?


    Huang Si ordered the automatic manufacturing lathe, and a prompt automatically popped up in the air.


    Automatic manufacturing lathe:


    The design room can be made automatically, greatly reducing the burden of the creator. It is recommended to give priority to production.


    Rule requirements: None


    Drawing requirements: None


    Material demand: the power of creativity


    No wonder it can be made directly, and the demand is really simple.


    Look at another thing.


    Automatic drawing instrument:


    It can automatically retrieve the atlas, automatically read the knowledge system held by the creator, calculate the drawing success rate, automatically draw the drawing and check the effectiveness of the drawing.


    The following requirements are as like as two peas.


    That "recommendation" is indeed reasonable. The automatic lathe can automatically manufacture and reduce the burden. At first glance, it is a good thing for him who loves laziness.


    The designer of the book of creation liked him very much. Although he didn''t know who it was, Huang thought praised him.


    Next, it''s simple. Huang Si pressed his hand on the line "automatic manufacturing lathe", and then a translucent phantom of the lathe appeared in the space around him. At the same time, a dialog box appeared near his fingers:


    Manufacturing: OK to cancel.


    When Huang Si points to the OK button, the diagram of the whole automatic manufacturing lathe automatically unfolds in his brain. Its complexity almost completely deprives him of all his thinking ability.


    Fortunately, Huang Si has been used to working under high pressure after experiencing the explosion of consciousness with the world projection at the core of the world.


    Huang Si looked at the lathe diagram displayed in his lower brain and found that he only needed to use the creative force to generate each part one by one as shown in the diagram, and some connected parts in the middle were also generated according to the diagram. The properties and materials of components are explained in detail, and even the functions and principles of each component after combination.


    It is worthy of being the first recommended production equipment for novices. Even the diagram has such a complete guide. While admiring the predecessors of the master system of creation, Huang Si planned to try it first.


    The creative power is derived from his soul, poured into the book space of the book of creation through physical contact, and then entered the design room.


    Illusory shadows loomed in the design room.


    This project is extremely complex. Huang Si spent almost 99% of his attention on making lathes, leaving only a little attention to meet daily needs.


    Countless complex patterns crossed from his consciousness, and then the creative force condensed bit by bit according to the diagram. The pattern of the lathe is as clear as weaving. In this process, he also wrote down the relevant knowledge of the function and operation of various parts in the lathe.


    It''s been a day.


    With the help of AI, Huang Si completely exhausted his creative power for the first time. He went to sleep. When he woke up, the reserve of creative power was almost full again.


    After tidying up and getting out of bed, Huang Simian was like a dish. He sat in the living room and waited for dinner.


    Moxia made breakfast for him. Seeing that he was in bad condition, he asked anxiously, "father is not feeling well?"


    "No, it''s all right. If you insist on metaphor, you can think about the feelings of the students who just finished the college entrance examination."


    Huang Si just consumes too much brain and soul.


    After breakfast and relaxing for a while, he invested in the manufacture of lathes.


    After all, it sounds like a thing that can hang up automatically. Making this is really sharpening the knife without mistaking the firewood cutter.


    Ten days later, Huang Si was finally free from the nightmare of making a lathe. During these eleven days, his soul almost always worked at full capacity, and now he only felt extremely tired.


    But there are benefits.


    The experience of making a lathe brought him relevant knowledge about machinery and design. In the space of consciousness, the law on the earth''s side has changed. Now the machinery has changed from 21.93% to 22.47%. Even he can vaguely sense that there is a law field of "design" nearby, but the estimated value is less than 1%, so he can''t even display the data.


    This kind of manual equipment experience is good. Although it is cumbersome and tired, it can learn something.


    After the lathe is formally formed, it is a square table with dense patterns on the surface. If you look carefully, you will find that it is not patterns, but some etched channels, just like circuit boards. The edge of the lathe is densely covered with 1 * 10e8 production interfaces, which can carry out multi-threaded production. The interior of the lathe is the automation core, which can automatically absorb the power of creation and automatically generate items according to the drawings.


    After the lathe was built, the experience of the design room became: level 1:110.


    This lathe is very large and takes up part of the space in the book.


    Huang Si explored this thing with consciousness and found that its function was extremely complex and difficult to explain in a scientific way.


    As mentioned in the book of creation, the composition of objects made in the design room is equivalent to artifact, but generally, the lowest artifact can not reach the level of creation artifact.


    Previously, Huang Si poked the "design" button and found that the interface only gave him a piece of white paper on which he could draw drawings with his ideas. He tried to draw it, but because of his bad idea, he accidentally drew a cat ear Laurie.


    The key is that he has no artistic cells. The cat ear Laurie doesn''t look like Laurie at all, just like a hairy monster.


    He was unconvinced and drew several more times, but each time it got worse and worse. People without painting talent are so terrible.


    Huang Si frowned, clicked the empty button in the design menu, deleted his graffiti and forgot this black history.