Time passed quickly. In the twinkling of an eye, it was the seventh day of the ninth lunar month, and Wang Bin also came to the factory on the morning of the seventh day of the ninth lunar month.


    Although according to the resumption time set by him before, the head office is working on the eighth day of the first month, as the boss of Tiangong technology, he can''t come to work on the eighth day of the first month like ordinary employees.


    In fact, it''s not just Wang Bin himself. In addition to Wang Bin himself, the middle and senior managers in the factory today also came back yesterday. Today, when Wang Bin came to the factory, they all came.


    "Mr. Wang, happy New Year!" when everyone saw Wang Bin entering the factory, someone kept saying hello to Wang Bin, and Wang Bin smiled and said hello to them one by one.


    At the same time, Wang Bin also sent a big red envelope in all the groups of the company with his own mobile phone and made some blessings.


    After arriving at the company, Wang Bin did not immediately go to his own laboratory or office, but first came to the conference room and entered the office conference room. Wang Bin found that Jiang Zongliang and Wang Xu were already in his conference room, and Cai Yuanxin and Huang Jingu, the two heads of the branch, had arrived.


    So Wang Bin also went directly to his own position, sat down and asked them, "manager Jiang, manager Huang, manager CAI and Wang Xu, how are your preparations for returning to work? After all, all companies will go to work tomorrow."


    "Boss, everything in our old factory has been arranged. As long as the employees punch in the morning the day after tomorrow, they will receive red envelopes from the company. At the same time, the security personnel in our old factory have also purchased a large number of fireworks and will set off tomorrow morning." seeing Wang Bin''s inquiry, Jiang Zongliang, the person in charge of the old factory, first replied.


    At the same time, Wang Xu and the heads of other branches also told about their company. Like Jiang Zongliang''s old factory, the new factory and several branches are ready. As long as the employees come back, they can start work immediately.


    At the same time, Wang Bin also asked about the employees in various factories and branches.


    Obviously, Wang Bin is worried that some employees will not come back after the Chinese new year, but fortunately, the situation in various factories and branches is not as Wang Bin thought.


    According to their report, this year, the employee return rate of Tiangong technology and its branches reached more than 98%, which made Wang Bin very satisfied.


    Several people held a whole morning meeting in the conference room. It was not until noon that Wang Bin, Wang Xu and Jiang Zongliang walked out of the conference room.


    ………


    On the morning of the eighth day of the first month, when Wang Bin drove to their Tiangong technology headquarters, he found that all the middle and senior managers of the head office stood at the door of the new factory, smiling to welcome their Tiangong technology employees to work.


    And whenever employees enter their Tiangong technology plant, as the person in charge of the new plant, Wang Xu will come forward with a smile and hand them a red envelope.


    Seeing this situation, Wang Bin secretly nodded for Wang Xu. Although Wang Xu is far inferior to Cai Yuanxing and Jiang Zhongliang in management, he also has his own strengths in many aspects.


    At this time, Wang Xu and they also found the arrival of Wang Bin, so the middle and senior management of Tiangong technology at the door said in unison, happy new year, boss!


    Then, the fireworks placed at the gate of Tiangong technology were also lit. For a moment, colorful sparks lit up the sky over Tiangong technology.


    After Wang Bin came to the company, he first walked around the factory buildings of the company and offered condolences to the workers from time to time. When he returned to his office, it was nearly ten o''clock in the morning, so Wang Bin immediately worried and held a meeting with the middle and senior management in the middle of Tiangong technology.


    In the afternoon, Wang Bin first went to the old factory, and then went to three branches in the city.


    When he came back, it was already in the evening, and Wang Bin didn''t care about it. After all, today was the first day of work. The workers only went to and from work symbolically in the morning. In the afternoon, after the meetings of various departments and workshops, there was basically no work. In this way, the first day of work in the new year passed.


    On the ninth day of the first month, their production of Tiangong technology was finally officially on track. Like yesterday, Wang Bin first came to the workshop after coming to their Tiangong technology.


    After entering the workshop, Wang Bin can clearly feel that the situation of the workshop at this time is obvious, and the atmosphere is much better than yesterday. All the workers are doing their work with all their heart. Wang Bin is very satisfied to see this situation.


    Soon Wang Bin came to the precision machining workshop. At this time, after such a long time of efforts, the machine tools in the workshop are far more than those applied from the superior, except for the more than ten ultra-high precision CNC machine tools applied by Wang Bin to the superior last time.


    At the end of last year, he applied to his superiors for several ultra-high precision CNC machine tools. At the same time, he also obtained several ultra-high precision CNC machine tools from foreign manufacturers through secret channels.


    Of course, with Wang Bin''s ability, it is certainly impossible to know these secret channels, but master Zhou contacted these channels.


    If it was in the past, with Wang Bin''s ability, even if he knew the channel, it would be very difficult for him to obtain foreign ultra-high-precision CNC machine tools, or even basically impossible.


    However, with the domestic breakthrough in ultra-high precision CNC machine tools, foreign manufacturers now have much less restrictions on domestic machine tools. As long as they have money and channels, they can still buy these machine tools, but if they are not obtained from special channels, foreign manufacturers also have very strict restrictions on these machine tools.


    For example, the use of the machine tool is limited, and the positioning system must be installed on the machine tool. At the same time, it is not allowed to disassemble and repair without permission. Even more excessive, it is necessary to send someone to supervise the use of the machine tool.


    But fortunately, Wang Bin''s machine tools are obtained from secret channels, there are no many restrictions, and there are no messy things such as positioning system.


    Of course, since the machine tool is obtained from secret channels, naturally it can not get the support of the manufacturer in terms of maintenance. Once the machine tool has problems, it can only be solved by itself.


    After a series of operations, at this time, there are nearly 50 high-precision CNC machine tools of various types in Wang Bin''s Tiangong science and technology precision machining workshop. Of course, most of the machine tools are from domestic manufacturers. These machine tools are both from Beizhong and Nanfang industry, There are also micro ultra-high precision CNC machine tools and laser engraving machines from Jingdiao.


    Of course, due to the increase in the number of machine tools, master Zhou is no longer the operator of these machine tools. At this time, there are dozens of skilled masters in the workshop, which are also invited by Wang Bin through various means.


    Some of them are recruited from the society, some are dug from other machinery factories, and some are introduced by master Zhou and others. In short, the precision machining workshop at this time is like a precision machining workshop.


    When Wang Bin entered the workshop, he did not attract the attention of all the masters in the workshop. They were still concentrating on processing the work in their hands.


    This is not an ordinary part, but the processing of large bearing sleeves and bearing rotors with high precision requirements, so they must pay attention, even if the machine tool they operate is a CNC machine tool.


    Soon Wang Bin came to a large ultra-high precision CNC machine tool in the workshop and looked at master Zhou who was processing high-precision bearing sleeves.


    It can be seen that more than half of the bearing sleeve has been processed and can be completed in a short time. Therefore, Wang Bin did not disturb master Zhou until the machine tool was processed and the measurement was completed. Wang Bin said to master Zhou, "master Zhou! What''s the situation?"


    Although master Zhou still processes large bearings, they are not the previous batch. The previous batch was completed as early as years ago, and the bearings being processed now are actually orders placed by 969 group.


    Of course, 969 group was very satisfied with the first batch of turret bearings processed, so it placed orders for these large bearings with Tiangong technology again.


    Moreover, the number of orders for this batch of large bearings is not small, with as many as 500 sets, which is enough for Tiangong technology to be busy for some time.


    After hearing Wang Bin''s inquiry, master Zhou found that Wang Bin came, so he said to Wang Bin: "President Wang! The production of large high-precision bearings is very smooth, and there is no situation. According to my judgment, if there is no accident, this order should be almost completed in about ten days!"


    After listening to master Zhou''s words, Wang Bin nodded. He found that there were several processed bearing sleeves next to master Zhou and said, "these are processed in the morning! Not bad. However, although it is not very difficult to process these bearings, you can''t take it lightly."


    "Mr. Wang! Please rest assured that we are all teachers. There will never be any problems." master Zhou replied.


    Later, Wang Bin came to the production workshop of high-precision bearings, that is, the high-precision bearing production line that Wang Bin applied for approval from the superior last time. However, due to the equipment, the maximum bearing diameter that this equipment can produce is about 500mm. At the same time, this production line can produce some ordinary types of ball and roller bearings, Some special bearings can also be produced.


    Therefore, the previous turret bearings can not be produced by this equipment, but there is still no problem in producing aircraft engines and bearings with a diameter of less than 500 mm.


    At this time, the bearing being produced by this production line is the ultra-high precision bearing ordered by Xifei here, that is, the core bearing of Hangfa.


    After a routine tour in the workshop, Wang Bin found that the workers were in good condition, and there was no situation that they couldn''t take care of themselves after a year, so Wang Bin returned to his office at ease.