"Yeah!!! We did it, we did it!!"


    "Great! Unexpectedly, we really developed a small special copper alloy production line. It''s great!"


    When Wang Bin announced the structure of the trial production, Yu Pingping and them immediately cheered loudly.


    Wang Bin did not stop them. Although this production line is only a small production line, as a special copper alloy production line, the technical content of the whole production line is not low. Most importantly, it is more difficult to use modern electronic equipment, so Yu Pingping et al, It is definitely not easy to develop this production line.


    After a while, when Yu Pingping and others calmed down, Wang Bin said to them again: "Yu Pingping, now that our production line has been tested successfully, the next step is to install the production line into the workshop and start formal mass production. In addition, since this production line is only a small production line and a production line with a very low degree of automation, your task is still very heavy.


    First, in the later production process of the production line, especially in the initial stage, you must send someone to guide workers to operate the production line, and be responsible for improving some defects of the production line to make the production line more perfect.


    At the same time, you have to design more advanced production lines, such as the degree of automation of the production line, improving the output of the production line, and so on. "


    After listening to Wang Bin''s words, Yu Pingping and others nodded. Yu Pingping said, "good president Wang! We have a specific plan. This afternoon, we will move this production line to plant 5. Although plant 5 is not very large, it is not a problem to put a few small production lines.


    At the same time, we have set up a special team for the follow-up improvement and maintenance of the production line. Although we only design and manufacture such a production line now, with more and more products and production lines designed and produced in the future, we must have special personnel to be responsible.


    Finally, we have a complete plan for the design of the new production line. Next, we are going to design a fully automatic production line with a daily production capacity of about 200 tons. If it is successful, we will carry out the design of medium and large production lines. "


    "Yes! But in terms of medium and large production lines, you don''t have to hurry, step by step!" Wang Bin nodded with a smile.


    In the afternoon, Wang Bin and Yu Pingping moved the production line to workshop 5 and completed the installation. At the same time, the production line began formal production the next morning.


    Of course, Wang Bin has not announced the copper based superconducting materials produced on this production line, and naturally there are no customers. Wang Bin is not in a hurry to announce it. After all, the production capacity of this production line is only 80 tons. Coupled with the use of room temperature superconducting materials and the performance of this copper based room temperature superconducting material, Wang Bin is not afraid that there will be no customers in the future.


    Therefore, Wang Bin is ready to store these copper based superconducting materials. After all, once Wang Bin establishes the production line of superconducting battery, the superconducting materials needed for superconducting battery alone will be very huge.


    When Wang Bin saw that the installation and production of the production line designed by Yu Pingping and others were very smooth, even if there were some small problems, they were quickly solved by the professional team established by Yu Pingping and others. Wang Bin also paid attention to the mechanical R & D and design team of Yu Pingping and others, turned back to his own laboratory and continued the trial production of the second generation superconducting battery technology.


    Although Wang Bin has been developing the second generation superconducting battery since years later, until now, he has not succeeded once, but he has not gained anything. So far, Wang Bin has successfully overcome many problems and is very close to success.


    Wang Bin believes that in a few days, he will definitely be able to successfully manufacture the second generation copper based superconducting battery.


    Sure enough, just a week after Pingping and others successfully developed the production line, Wang Bin also successfully manufactured the first second-generation copper based superconducting battery, and its performance met the standard required by the technical data in his mind.


    As for the follow-up third-generation copper based superconducting battery technology, Wang Bin is not ready for trial production for the time being. After all, the second-generation superconducting battery technology has cost Wang Bin nearly a month and a half. If he continues to trial produce the third-generation superconducting battery technology, Wang Bin believes that even if he has a complete superconducting battery technology in his brain, he will not be able to trial produce it for a while and a half.


    Moreover, even the first and second generation copper based superconducting batteries have not been mass produced, so there is no need to rush to trial produce the third generation technology.


    Most importantly, according to the current situation of Tiangong technology, even the first and second generation superconducting batteries are enough for Tiangong technology.


    Of course, manufacturing the first second-generation superconducting battery does not mean that it can be produced on a large scale. After all, it is only trial production in the laboratory. If you want to carry out large-scale production, you must have a corresponding production line. Fortunately, he also has the technology of the production line in his mind. At the same time, it is not too difficult in terms of technology.


    Most importantly, in terms of production line, Wang Bin doesn''t have to work behind closed doors in the laboratory alone. He can let Yu Pingping and others carry out R & D and production together. After all, Tiangong technology has a mechanical R & D team.


    Moreover, the production line technology is not afraid to be known, because even if others get the production line, what can they do? Without copper based room temperature superconducting materials, it is impossible to produce any volume superconducting batteries!


    So after completing the trial production of the second generation superconducting battery technology, Wang Bin went out of his laboratory and returned to his office to go to their machinery R & D workshop in Pingping tomorrow to prepare for the development of the production line.


    However, before Wang Bin returned to his office, the mobile phone in Wang Bin''s pocket rang.


    Wang Bin picked up the mobile phone in his hand and found that it was the call from the professor poked by the R & D laboratory.


    So Wang Bin immediately couldn''t wait to pick it up. At the same time, his heart was vaguely excited. He knew that under normal circumstances, the aviation development laboratory over there would not call him. They would call Wang Bin unless there were any major happy events or problems.


    At the same time, he learned from Professor Zhang a few days ago that all the parts of the aeroengine have been manufactured. Professor Zhang is checking these parts one by one. If there is no accident, they will be assembled in the next two days. Therefore, Wang Bin looked forward to it after receiving Professor Zhang''s call, That aeroengine may have been successfully manufactured with the efforts of Professor poke and others!