With Wang Bin''s inspection of these engines that have been tested for nearly 8000 hours, he is still very satisfied with the test performance of this engine. Of course, if the performance of the bearings is better, it will be more perfect.


    At the same time, after the commissioning of these ten engines, the laboratory is also ready to start the commissioning of new engines. Because through the efforts of Tiangong technology over this period of time, the second aeroengine and the third engine, that is, the turbofan engine and electric helicopter engine of large bypass ratio, have been designed and mapped, It is ready for trial production.


    Of course, compared with the second engine, that is, the turbofan engine with large bypass ratio, the third engine, that is, the engine of electric helicopter, costs much less in R & D, testing and testing.


    At the same time, on the test platform, the electric engine no longer needs the same test platform as the fuel engine. After all, the two use different energy and internal structure, and naturally need different platforms.


    Therefore, the No. 2 engine, that is, the turbofan engine with large bypass ratio, will be tested in this test workshop.


    After Wang Bin and Professor Cha completed the full life test of YG001 engine, they immediately arranged the trial production of large bypass ratio turbofan engine and electric helicopter. Wang Bin went out of the laboratory and returned to his office.


    At the same time, at this time, the second batch of tg001 engines of Tiangong technology have been manufactured and sent to the aircraft manufacturing plant, that is, the production plant of No. 10 and No. 16 fighters.


    However, Wang Bin has purchased a large number of high-end equipment from the technology mall and reality during this period, so the number of engines manufactured this month is not the same as Wang Bin said before, but as many as 16, which is six miles more than Wang Bin said before.


    Of course, with the delivery of the second wholesale motive, both the No. 10 fighter factory and the No. 16 fighter factory suddenly began to be busy.


    However, compared with the factory of fighter 10, the factory of fighter 16 is even more so. After all, fighter 10 does not need to make too many modifications to install this engine. Even if the electronic equipment and batteries used on fighter 10 are replaced, it does not need to make too many modifications to fighter 10, So at this time, the No. 10 fighter factory has begun to produce a new No. 10 fighter using this engine.


    The No. 16 fighter is different, although as early as last month, the No. 16 fighter factory had finalized a new model scheme using tg001 engine.


    But so far, the new 16 has not been manufactured, but fortunately, the preparations have been basically completed, and the new 16 fighter has also begun to be manufactured.


    Of course, as the new No. 16 fighter began to be manufactured, the air force also attached great importance to this matter. Even from time to time, senior generals of the air force came to check the progress and accuracy of this aircraft.


    In this regard, the manufacturer of the No. 16 fighter did not dare to slack off at all, and took out 12 minutes of the factory''s energy to manufacture this new No. 16 fighter.


    Of the course, as new No. 16 fighter began to be manufactured, of theficials did not hide this, but reported relevant contents on major official media from time to time.


    As for the Internet, the news of this new No. 16 fighter is everywhere.


    Take a well-known network media as an example, it spent a lot of time reporting on the new No. 16 fighter, especially the performance of the engine on the new No. 16 fighter, that is, the engine of Tiangong technology.


    Even in the news of this media, there are full-color pictures of fighter 16 and some level basic data.


    For example, the maximum thrust of the engine reaches more than 150 kn, and the first overhaul lasts more than 5000 hours. The reliability of the engine, the safety of the engine, the high and low altitude performance of the engine and so on.


    Of course, due to the network media, the reported data can not be the real data of this engine. In addition to the data already published by the official and Tiangong technology, most of the other data are only fabricated by these network media. After all, this data is not published by the official or Tiangong technology, and it is impossible to publish it.


    With a large number of reports from these media, the new No. 16 fighter, together with Tiangong technology, became popular. Many people, especially those military fans, are very looking forward to the service of this fighter.


    Northwest, a military aircraft manufacturing and production base, several senior aero-engine R & D personnel of the base are having a meeting, and there are several people''s faces. If Wang Bin was present, they would know each other.


    "Li Gong, unexpectedly, Tiangong technology has successfully completed the service life test of this engine in such a short time. Although Tiangong technology has only published data of 5000 hours.


    But in fact, according to the information I got, the service life of this engine of Tiangong technology is far more than 5000 hours, but up to nearly 8000 hours. I don''t know how they do it.


    After all, even the No. 10 engine of our company can only reach about 3000 hours. This is what we can achieve by replacing the bearing in the engine with the bearing of Tiangong technology. If we don''t use the bearing of Tiangong technology, don''t say 3000 hours. Even if we want to reach 2000 hours, it''s very difficult. " In the conference room, a technician first said.


    "It''s true. I can''t imagine that Lao Pao and others of Tiangong technology are so powerful. Why didn''t they see it before? If you know that Lao Pao is so powerful, you should bring him to our company.


    In that case, our company''s No. 10 engine is likely to have broken through long ago. There is no need to wait so long. Most importantly, it is likely that the performance of No. 10 engine will also be improved! "Lao Li said.


    "Who says not! But it''s too late now. After all, with the current situation of old pokes, even if our company pays a high price, old pokes can''t come to us.


    After all, compared with us, Laozhang is much more free in Tiangong technology. In addition to being responsible to the boss Wang Bin, Laozhang is in charge of everything. Unlike us, no matter what the project is, it must apply to the superior and can be carried out only after it is approved. "Another technician said.


    "Well, let''s not talk about this. What we have to do now is how to improve the thrust and performance of our No. 10 engine. I think we have spent so much effort and have all kinds of national support. We want people to ask for money, but it must be hard for us to be surpassed by the engine developed by a private enterprise!


    Let''s keep working hard! I don''t ask our engine to surpass the tg001 engine of Tiangong technology in terms of performance, but at least it can''t be too far behind the tg001 engine. "When everyone talked and envied Professor poke, Lao Li said.