So Wang Bin immediately turned and walked into the mechanical test workshop.


    "Mr. Wang, we succeeded. We finally successfully developed an ultra-high precision CNC machine tool, and it is still an ultra-high precision CNC machine tool with a precision of 0.001 microns. The most important thing is that this machine tool is completely designed and manufactured by ourselves." when Wang Bin walked into the workshop, he was seen by Yu Pingping who was just at the door of the workshop, So he immediately said to Wang Bin excitedly.


    "What? You have developed ultra-high precision CNC machine tools?" when Wang Bin listened to Yu Pingping''s words, he was also surprised. You know, a few months ago, when Yu Pingping and others said they would develop ultra-high precision CNC machine tools, Wang Bin also promised Yu Pingping and others with an indifferent attitude and gave them some help, However, this help is not drawings, but only in terms of funds and manpower.


    However, Wang Bin didn''t have much expectations for Yu Ping''s equal person''s project. After all, without Wang Bin, he bought drawings from the system and only relied on Yu Pingping themselves to successfully develop ultra-high precision CNC machine tools. In Wang Bin''s view, this is simply impossible.


    However, the facts are often unexpected. He did not expect that Yu Pingping and others could really develop ultra-high precision machine tools.


    "This! This is true?" until this time, Wang Bin still couldn''t believe it.


    So he immediately looked into the workshop. Sure enough, a machine tool was placed in the workshop. However, the volume of the machine tool was not large, and the maximum working site of the workbench was definitely no more than 1000mm. Therefore, if it was distinguished according to the type of machine tool, the machine tool should be a small machine tool.


    Seeing this, Wang Bin immediately stepped forward and carefully looked at the machine tool. Wang Bin is no stranger to the materials used in the ultra-high precision small machine tool developed by Yu Pingping and others. Except for some electronic components, others are basically the talents developed by Wang Bin and Tiangong technology.


    For example, the ball screw of the machine tool is made of their special glass of Tiangong technology. At the same time, the machine bed and some casting parts of the machine tool are made of special glass. In addition, some stress parts and wear parts of the machine tool are made of their special bearing steel of Tiangong technology. It is roughly estimated, Wang Bin found that the cost of this machine tool is really great. Its cost is at least several times or more than that of machine tools of the same level. After all, whether it is special glass or special bearing steel, its cost is not low, at least not comparable to those gray iron.


    After watching for a while, Wang Bin found that this machine tool is still a five axis CNC machine tool, which is even more unexpected than Wang Bin''s expectation. You know, this is a high-precision five axis CNC! Even in the world, few countries can make such a five axis machine tool, but it was made by Yu Pingping and others.


    "Yes, to tell you the truth, Yu Pingping and Jia Jie, you really surprised me. I thought it was basically impossible to develop ultra-high precision CNC machine tools by yourself.


    Even if we can develop some achievements, its precision can only be similar to that of ordinary precision machine tools at most. At the same time, it is great to develop three-axis machine tools at most.


    Unexpectedly, you have developed a machine tool with a precision of 0.001 micron. It''s good, really good! "Wang Bin said happily.


    "Mr. Wang! To tell you the truth, we only went for three-axis high-precision CNC machine tools before. After all, we know our own level. However, when we applied to Mr. Wang for R & D funds, Mr. Wang did not hesitate and directly gave us several times the funds we need. In addition, many equipment in Tiangong technology are the highest in the world Class equipment, including those machine tools in our precision machining workshop.


    It was with this in mind that we hardened our scalp and simply developed five axis CNC directly.


    However, the difficulty of developing this machine tool has exceeded our expectations. After all, it is also an ultra-high precision five axis CNC machine tool!


    So we tried our best, and even got in touch with our college tutors. Finally, with the help of our tutors, we solved these difficulties one by one, and finally developed the machine tool in front of us. "Yu Pingping was excited, but he was still a little lucky, because he knew very well that without the inexhaustible investment of Tiangong technology, Without the help of his tutor, he could not have developed this machine tool.


    "Although the funds of our Tiangong technology and the help of your tutor are indeed very helpful to the development of this machine tool, the success of this machine tool is inseparable from your own efforts. All of you are the greatest heroes.


    At the same time, I also believe that if you can develop this machine tool, you can also develop larger and more precise machine tools in the future. "Wang Bin calmed his excitement and said positively to Yu Pingping and others.


    After listening to Wang Bin''s words, Yu Pingping and Jia Jie were even more excited.


    After more than ten minutes, Yu Ping''s mood calmed down.


    At this time, Yu Pingping suddenly thought of something and said to Wang Bin; "Mr. Wang, I heard from my mentor that he will retire to the second line in a while, so I want to invite my mentor to Tiangong technology. What do you think of Mr. Wang?"


    "What! That''s a good thing! It''s just that there is no person in charge of the general direction in your machinery laboratory. It''s good for your mentor to come and take charge of the work in your machinery laboratory.


    As for you and Jia Jie and others, I asked you to stay in the machinery laboratory, and Jia Jie, I''m going to transfer him to other laboratories to add some burden to him, "Wang Bin said.


    As for what burden Wang Bin said, in fact, Wang Bin doesn''t have to say. Yu Pingping and Jia Jie both know that it''s the space laboratory.


    As early as when the rocket launch site and the rocket laboratory project started, Wang Bin had come to talk to them and asked them for their opinions at that time. However, Yu Pingping finally decided to stay in the mechanical laboratory because he was not very confident in himself or had no experience and knowledge in the research and development of rockets.


    But Jia Jie is different. Although Jia Jie said that when he was in college, his major was also mechanical, he also had some achievements in rockets because he was very interested in aerospace. Now that Wang Bin has given him this opportunity, Jia Jie certainly won''t refuse and promised on the spot.


    Now, although the construction of the rocket launch site has not been completed, after all, such a large project can not be completed in a moment and a half, after all, the military engineering team is not comparable to the civil engineering team. From the beginning of the project to now, it has only taken such a short time. They have not only built several factory areas, but even the first barren mountain, It has been removed by half by the engineering department.